Canon XF200 Camcorder User Manual


 
Video Output Configuration
158
Playback Video Configuration and Video Output Configuration by Terminal
Refer to the following tables for the video output configuration from each terminal, depending on the video
configuration of the clip being played back.
Operating modes:
HDMI OUT terminal and AV OUT terminal
1
Onscreen displays can be superimposed and output to an external monitor (A 163).
2
[¢ Video Setup] > [MON.].
3
The zebra pattern can be output to an external monitor (A 89).
4
The video signal will change automatically depending on the capability of the external monitor.
5
MP4 clips only.
6
MXF clips only.
7
Only when [¢ Video Setup] > [3G/HD-SDI] is set to a setting other than [Compatible] and [¢ Video Setup] > [HDMI] is set
to [+1920x1080 50.00P].
Recording video configuration HDMI OUT terminal output
1
AV OUT
terminal output
1
(SD output)
Bit rate Frame rate
[MON.] setting
2
[HD]
3
[SD] [Off]
4
1920x1080
50.00P
5
1080/50.00P
7
576/50.00i
1080/50.00P
7
576/50.00i
50.00i
6
1080/50.00i
1080/50.00i or
576/50.00i
25.00P
1280x720
50.00P
720/50.00P
720/50.00P or
576/50.00i
25.00P
3G/HD-SDI terminal and MON. terminal
1
Onscreen displays can be superimposed and output to an external monitor (A 163).
2
[¢ Video Setup] > [MON.].
Video configuration of the clip
3G/HD-SDI terminal
output
MON. terminal output
1
Movie format Bit rate Frame rate
[MON.] setting
2
[HD] [SD]
MXF
1920x1080
50.00i /
25.00P
1080/50.00i 1080/50.00i
576/50.00i
1280x720
50.00P /
25.00P
720/50.00P 720/50.00P
MP4
1920x1080 /
1280x720 /
640x360
50.00P /
25.00P
1080/50.00P 1080/50.00i
C OPY