Canon ZR960 Camcorder User Manual


 
16 • Preparations
1 Slide in the direction of the
arrow and hold it pressed down.
2 Slide the battery pack down and
then pull it out
IMPORTANT
We recommend charging the battery
pack in temperatures between 10 °C
and 30 °C (50 °F and 86 °F). Outside the
temperature range of 0 °C to 40 °C
(32 °F to 104 °F), charging will not start.
Do not connect to the camcorder’s DC
IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.
To prevent equipment breakdowns and
excessive heating, do not connect the
supplied compact power adapter to
voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.
NOTES
The battery pack will be charged only
when the camcorder is off.
If remaining battery time is an issue, you
can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.
The CHG (charge) indicator also serves
as a rough estimate of the battery
charge status.
Two quick flashes at 1-second intervals
:
Battery pack at least 50% charged. If
the indicator flashes quickly but not
exactly in this pattern, refer to
Troubleshooting (50).
One flash at 1-second intervals
: Battery
pack less than 50% charged.
Charged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day
before, to ensure a full charge.
We recommend that you prepare battery
packs 2 to 3 times longer than you think
you might need.
USA and Canada only: The
Lithium ion/polymer battery
that powers the product is
recyclable. Please call
1-800-8-BATTERY for
information on how to recycle this battery.
TO REMOVE THE BATTERY PACK
BATT. switch
BATT.
C OPY