Filter
Top Products
PLAYBACK
147
2.
Turn off the camera.
3.
Set the camera onto the USB cradle.
4.
Turn on the TV and select its video input
mode.
5.
Press [ ] to turn on the camera, and then
perform the required operation for playback.
IMPORTANT!
• Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 167) when you connect to a TV to view
images.
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• Pressing the USB cradle’s [PHOTO] button will
activate the Photo Stand feature (page 141) and
display images on the TV screen.
• Depending on the size of the TV screen, recorded
images may not fill the entire screen.
• For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
• After using an optionally available AV cable (EMC-
3A) to connect the camera’s USB cradle connector
directly to the AUDIO IN terminal of a TV, you can
view recorded images on the TV and even use the
TV screen to compose images before recording
them.
NOTE
• You can use the camera’s USB cradle to connect to
a DVD recorder or video deck and record images
from the camera. The following explains how to use
the bundled AV cable.
— DVD recorder or video deck: Connect to the
VIDEO IN and AUDIO IN terminals.
— USB cradle: Connect to the [AV OUT] (AV output
port)
— Camera: Place onto the cradle
You can play a slideshow of snapshots and movies
on the camera and record it on a DVD or video tape.
You can record movies by selecting “ Only” for
the slideshow “Images” setting (page 139). When
recording images to an external device, use [̆]
(DISP) to clear all indicators from the monitor screen
(page 30).
B