Filter
Top Products
BASIC IMAGE RECORDING
E-46
• You can find out the status of
the Auto Focus operation by
checking the color of the
focus frame and the status of
the operation/card access
lamp.
• Take care that you do not
block the lens or the
sensors with your fingers
as you hold the camera.
7.
After confirming that
the image is in focus,
press the shutter
release button all the
way down to record the
image.
• Recorded images are temporarily stored in a buffer
from which they are stored to the memory card. You
can continue to shoot consecutive images as long as
there is space available in the buffer.
• The number of images you can store in the camera
depends on the storage medium and the image quality
setting (page E-94) you are using.
• To avoid hand movement, press the shutter release
button gently.
Operation/card
access lamp
If you see this:
Focus frame: Green
Operation/card access lamp:
Green
Focus frame: Red
Operation/card access lamp:
Red
It means this:
The image is in focus.
The image is not in focus.