Filter
Top Products
BASIC IMAGE RECORDING
E-52
Select this setting:
No display
10SEC
2SEC
To do this:
Turn the self-timer off
Record 10 seconds after the
shutter release button is pressed
Record two seconds after the
shutter release button is pressed
3.
Press the shutter release button to start the
self-timer countdown.
• The AF assist light/self-timer lamp flashes as the sec-
onds are counted down. If you have the monitor
screen turned on, the seconds are counted down on
the screen.
• To stop a countdown part way through, press the shut-
ter release button.
NOTES
• The hand-shake limiter is enabled when you use a
slow shutter speed and the two-second self-timer at
the same time.
• You cannot use the self-timer in combination with the
Continuous Shutter Mode.
Self-timer Time Settings:
Each press of cycles through the available self-
timer settings described below.
Using the Self-timer
You can set the self-timer to either one of two starting times.
1.
Align the power/function switch with .
2.
Press to select the self-
timer time you want.
Self timer
Time