Filter
Top Products
121
Other Playback Functions (PLAY)
4. Use [8] and [2] to select “On” and then press [SET].
This will protect the image and display the › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5. After you are finished, select “Cancel” and then press [SET] to exit this
operation.
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 164).
. To protect all the images in a CS group
1. While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use [4] and [6] to select the “PLAY” tab.
3. Use [8] and [2] to select “Protect” and then press [SET].
4. Use [4] and [6] to display the CS group you want to protect.
5. Use [8] and [2] to select “On” and then press [SET].
This will protect all the images in the group and display the › icon.
• To unprotect all of the images in the group, select “Off” in step 5 and then press
[SET].
6. Press [MENU].
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 164).