Filter
Top Products
52
Snapshot Tutorial
1. In the REC mode, press [BS] (BEST SHOT).
2. Use [8], [2], [4], and [6] to select “High
Speed CS” and then press [SET].
• This will display Š (High Speed CS).
3. Press [SET].
4. Use [8] and [2] to select the fourth control
panel option from the bottom (High Speed CS fps).
5. Use [4] and [6] to select the continuous shutter
(CS) speed you want.
6. Use [8] and [2] to select the third control panel
option from the bottom (Max CS shots).
7. Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation.
8. Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
9. Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero. Note that the mechanical shutter is used
when shooting with High Speed CS.
3 to 30 fps
Enables specification of the number of CS images recorded per
second.
Shutter button full-press
Number of pre-record
images and pre-record
time
Number of remaining images
and remaining recording time
after the shutter button full-
press
High Speed CS icon
CS speed