Filter
Top Products
53
Snapshot Tutorial
13.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero.
14.
Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
15.
Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord CS is selected.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
16.
When you are ready to shoot, press the shutter button the rest of the
way down.
This will record the images in the pre-record buffer and start recording new
images in real-time. Images continue to be shot as long as you keep the shutter
button depressed.
17.
Real-time shooting will stop when you release the shutter button or
after the maximum number of shots is reached.
18.
Save the CS images (page 56).
Shutter button full-press
Number of pre-record
images and pre-record
time (Not displayed when
“AUTO” is selected for
“High Speed CS fps”.)
Number of remaining images
and remaining recording time
after the shutter button full-
press (Not displayed when
“AUTO” is selected for “High
Speed CS fps”.)
Number of recordable CS images (If you are not performing
Prerecord CS, the allowable continuous shutter time also is displayed.)
Remaining snapshot memory capacity