Casio EX-FS10 Digital Camera User Manual


 
121
Printing
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
Note that the specified number of copies will be printed for all of the images in
any CS group included with the images.
If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
2. Press [SET].
NOTE
You can specify the number of copies for a specific image (page 121) or for all of
the images in a CS group (page 122) by performing the above procedure while an
image in the group is displayed.
. To specify the number of copies for a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].
3. Use [8] and [2] to select “Select images” and then press [SET].
4. Use [4] and [6] to scroll through images until one you want to print is
displayed.
5. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [BS] to select “On” for date
stamping.
Repeat steps 4 and 5 to configure settings for other images, if you want.
6. Press [SET].