Casio EX Z 2 Digital Camera User Manual


 
49
Recording Movie Images and Audio
NOTE
Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
The camera also records audio. Note the following points when shooting a movie.
Take care that the microphone is not blocked by your
fingers, etc.
Good recording results are not possible when the camera
is too far away from what you are trying to record.
Operating camera buttons while shooting can cause
button noise to be picked up in the audio.
Shooting a very bright subject can cause a vertical band to
appear in the monitor screen image. This does not indicate
malfunction. The band will not be recorded in a snapshot,
but will be recorded in the case of a movie.
Use of certain types of memory cards increase the time it takes to record movies,
which can cause movie frames to be lost. This condition is indicated by » and Y
flashing on the monitor screen. To avoid loss of movie frames, use of a memory
card with a maximum transfer speed of at least 10MB per second is recommended
(page 131).
Only digital zoom can be used for zooming during movie recording. Since optical
zoom is not possible while recording a movie, zoom as required before pressing
[0] to start recording.
The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
Auto Focus and Macro Focus become fixed focus while shooting a movie (page
57).
Microphone