Filter
Top Products
124
Appendix
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low. Battery power is low.
Card ERROR
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 104).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Connecting to the
network
Camera power was turned off while image data was being
copied to a computer or other device using a FlashAir card or
an Eye-Fi card (pages 90, 92).
File could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 29).
Images are being
transferred. Stop
transfer and turn
off power?
You are attempting to turn off power while image data is
being transferred using the Eye-Fi card (page 90).
LENS ERROR
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
29).
Record Error
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
RETRY POWER ON
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.