Casio EX-S200 Digital Camera User Manual


 
99
Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab *
Dubbing
2. Press [SET] again to stop audio recording.
Take care that you do not block the camera’s microphone
with your fingers while recording.
Good recording results are not possible when the camera is
too far away from what you are trying to record.
Your camera supports the following audio data formats.
Audio Format: WAVE/IMA-ADPCM (WAV extension)
You cannot add audio to an image that is protected.
To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [AUTO].
IMPORTANT!
Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2. Press [0] (Movie) to start playback.
Adding Audio to a Snapshot (Dubbing)
You can add audio to a snapshot after you shoot it.
You can re-record a snapshot’s audio whenever you
want. You can record up to about 30 seconds of audio
for a single snapshot.
1. Press [SET] to start audio recording.
Remaining recording time
To play snapshot audio
Microphone