Filter
Top Products
128
ADVANCED SETTINGS
You can have the snapshot’s recording date only, or date and
time stamped in the lower right corner of the image.
1. In the REC mode, press [MENU].
2. On the “Set Up” tab, select “Timestamp” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Example: December 24, 2006, 1:25 p.m.
IMPORTANT!
• Once date information is stamped in a print, it cannot be
deleted.
• Use the “Date Style” setting (page 189) to specify the Year/
Month/Day format of the date.
• The recording date and time are determined in accordance
with the camera’s clock settings (pages 12, 188) when the
snapshot is recorded.
• Digital zoom and Instant Zoom are not supported while
date stamping is turned on.
• Date stamping is not supported for the following types of
images.
– Some BEST SHOT images (Business cards and
documents, White board, etc., Old Photo, ID Photo)
– Images recorded with Zoom Continuous Shutter
Date Stamping Snapshots
To do this: Select this setting:
Display the date only (2006/12/24) Date
Display the date and time (2006/
12/24 1:25pm)
Date&Time
Display nothing Off
C