Filter
Top Products
INTRODUCTION
21
Caring for your camera
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
• Fingerprints, dirt, and other foreign matter on the flash
can interfere with proper operation of the camera. Avoid
touching the flash. If the flash becomes dirty, wipe it clean
with a soft, dry cloth.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
Other
• The camera may become slightly warm during use. This
does not indicate malfunction.
Power Supply
• SANYO Electric Co., Ltd. brand type HR-3UA, HR-3UB,or
HR-3UF batteries are recommended when using
rechargeable nickel metal hydride batteries to power this
camera.
• This camera does not have separate batteries for the
clock. The date and time settings of the camera are
cleared whenever power is totally cut off (from both the
batteries and AC adaptor). Be sure to reconfigure these
settings after power is interrupted (page 168).
Lens
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• You may sometimes notice some distortion in certain
types of images, such as a slight bend in lines that should
be straight. This is due to the characteristics of lens, and
does not indicate malfunction of the camera.