Filter
Top Products
12
Quick Start Basics
1. Open the battery cover.
Pressing down at the arrow marked on the battery cover,
slide it in the direction indicated by the arrow in the
illustration.
2. Load the battery.
With the EXILIM logo on the battery
facing downwards (in the direction of the
lens), hold the stopper next to the battery
in the direction indicated by the arrow as
you slide the battery into the camera.
Press the battery in until the stopper
secures it in place.
3. Close the battery cover.
Pressing the battery cover against the camera, slide it
closed.
• For information about how to replace the battery, see
page 142.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about two days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. You will have to re-
configure the settings after power is restored.
• See page 163 for information about battery life and memory capacity.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (flash off) for the flash setting
(page 26).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 127, 128).
To load the battery
Remaining Power High Low
Battery Indicator ***
Indicator Color Cyan * Amber * Red * Red
2
1
Battery
Stopper
1
2