Filter
Top Products
15
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-110)
for power. Never try to use any other type of battery.
1. Open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows in
the illustration.
2. Load the battery.
With the EXILIM logo on the battery
facing upwards (in the direction of
the monitor screen), hold the
stopper next to the battery in the
direction indicated by the arrow as
you slide the battery into the
camera. Press the battery in until
the stopper secures it in place.
3. Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
First, charge the battery prior to use.
To load the battery
EXILIM logo
Stopper
Battery
OK NG