Filter
Top Products
73
Viewing Snapshots and Movies
1. Use an optionally available AV cable (EMC-4A) to connect it to the TV.
• Make sure that you insert the cable connector into the USB/
AV port until you feel it click securely into place. Failure to
insert the connector fully can result in poor communication or
malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown in
the illustration.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3. Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 115).
Viewing Snapshots and Movies on a TV Screen
Yellow
AV cable
USB/AV port
White
Making sure that the mark on the AV cable
connector is towards the lens side, connect the cable
to the camera.
VIDEO IN jack (yellow)
AUDIO IN jacks (white)
TV
AudioVideo