Casio QV 10 B Digital Camera User Manual


 
53
Playing Back Images
Producing a Multi-Page Display
Four or nine memory pages can be displayed at the same time. This
feature can be used to display multiple memory pages on the
camera’s built-in LCD, or on the screen of a connected TV.
1. Enter the Playback Mode and turn on the camera.
2. Switch to multi-page display.
Press the MODE button to
change between the different dis-
play formats.
Each press of MODE changes the
display format in the following se-
quence.
* The memory page that is shown on the screen when you
change to the 4-page or 9-page format is in the first (upper
left) position in the multi-page display.
Operation
54
3. Scroll through the pages on the display.
Use [+] (forward) and [–] (back) to scroll through the memory
pages. Pages are scrolled one, four, or nine at a time, de-
pending on the display format you are using.
Unused pages are colored gray.
Note
The brightness of the images on a multi-page display may differ
slightly from the brightness when a single image is shown. This is
because the camera automatically uses the brightness setting for
the brightest image contained in the multi-page display for all of the
images.
55
Playing Back Images
In this example, we will select this page.
Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
1. In the Playback Mode, press the MODE button.
This changes to the 4-page dis-
play.
2. Press the DISP button.
This causes a white line to appear
under the first (upper left) page.
This white line indicates the
memory page that is currently se-
lected.
If you do not perform any opera-
tion for about 10 seconds, the
white line disappears from the dis-
play.
Operation
56
3. Move the white line to the memory page that you want to
select.
Press [+] to move the line to the
right or [–] to move it to the left. In
this example, press [+] three
times or [–] once.
4. Press the ZOOM button.
The image in the selected
memory page appears as a 1-
page display.
X 3