Filter
Top Products
69
Playing Back Images
To unprotect a page
1. Enter the Playback Mode and turn on the camera.
2. Scroll through the memory pages until the one you want to
unprotect is displayed.
3. Press the /PROTECT button.
• The letter “P” disappears, indicating that page is no longer
protected.
Note
• If the page number is not displayed when you press the /PRO-
TECT button, the page number appears about a second after you
press the button.
70
Operation
Deleting Memory Pages
Use the procedures described in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.
Warning!
The delete operation cannot be undone!
Before performing any of the procedures described in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.
To delete a single memory page
1. Enter the Playback Mode and turn on the camera.
• Slide the function switch to the PLAY position.
• Slide the POWER switch in the direction indicated by the
arrow.
2. Scroll through the memory pages until the one want to de-
lete is displayed.
• Press [+] to display the next memory page or [–] to display
the previous memory page.
• Remember that you cannot delete a protected page. If the
page you want to delete is protected, use the procedure on
page 69 to unprotect it before proceeding.
71
Deleting Memory Pages
3. Press DEL.
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
5. Make sure that you really want to delete the page that con-
tains the contents shown on the display.
• You can use [+] and [–] to change the memory page. When
you do, protected pages are skipped (not displayed).
4. Press the [+] button to specify deletion of a single page.
• If the page you selected in step 2
is protected, the contents of the
nearest unprotected page appear
in the above screen.
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
The contents of
the memory page
you displayed in
step 2 appear
here.
One-page delete
All page delete
Exit this screen
72
Operation
• To abort the delete operation without deleting anything,
press DEL.
6. To delete the page whose contents are shown, press the
shutter button.
• Pressing the shutter button de-
letes the page you selected and
displays the next page.
7. Repeat steps 5 and 6 as many times as you want to delete
memory pages.
• After you are finished deleting pages, press DEL to exit the
delete operation.
Note
• Deleting a page causes the remaining pages to be renumbered.
Blank pages are not left inserted between non-blank pages.