Filter
Top Products
9
Unpacking
Check to make sure that all of the items shown below are included
with your camera. If something is missing, contact your dealer as
soon as possible.
Soft case
Alkaline batteries (AA-size
×
4)
Camera
Cleaning Cloth
Wrist Strap
Manual
Video cable
Getting Acquainted
10
General Guide
The following illustrations show the names of each component, but-
ton and switch on the camera.
Top and Display
Lens
Lens
TELE(telephoto)/
WIDE(Wide-angle) switch
LCD
[–] (Reverse)
button
POWER switch Function switch
Aperture
switch
[+] (Forward)
button
Shutter button
DEL (Delete) button
MODE button
EFFECT button
DISP (Display)
button
NORMAL/
MACRO
switch
/PROTECT
(Timer/Protect)
button
11
Important!
Make sure that the terminal panel cover is slid fully away as shown in
step 2 above before trying to raise it. Forcing the cover up can seri-
ously damage it.
General Guide
Bottom
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.
The brightness is set at the factory to the optimum setting, and nor-
mally does not need adjustment.
Battery
compartment
lock
Battery compartment cover
Tripod
hole
Terminals
AC Power terminal
VIDEO OUT terminal
DIGITAL
terminal
Terminal panel cover
Opening the Terminal Panel Cover
11
11
1
22
22
2
33
33
3
Getting Acquainted
12
Connecting the Wrist Strap
Pass the wrist strap through the hole on
the side of the camera as shown in the
illustration.
Using the Cleaning Cloth
Use the cleaning cloth to wipe finger-
prints and smudges from the LCD and
lens.
• Be sure to avoid applying too much
pressure when wiping the LCD. Too
much pressure can cause permanent
discoloration, abnormal images, and
cracks.
Using the Soft Case
Keep the camera in its soft case to pro-
tect it when not in use.
22
22
2
11
11
1