Filter
Top Products
P.7
Resolution
Exposure value
Date/Time
TV out
Timestamp
Exposure value
Date/Time
TV out
Timestamp
Resolution
SETUP
SETUP
3.0M
2.0M
0.3M
3.0M
2.0M
0.3M
RESOLUTLON
RESOLUTLON
0.0
0.0
EV
EV
0.6
0.6
EV
EV
2004 0131
24:00:01
2004 0131
24:00:01
Date/Time
Date/Time
Resolution Adjustment
Select "Resolution" and press OK Button. Choose the desired resolution
and press OK button to change the image resolution. Indicates 0.3MP,
indicates 2.0MP, and indicates 3.0MP on the LCD screen.
Exposure Value
Select "Exposure value" and press the OK button. This allows you to change
the exposure setting suggested by the camera. Press the Up or Down button
to select a value between -1.5 and 1.5 and press OK button to accept the
exposure value. Negative exposure values tend to underexpose (darken) your
object while positive values will overexpose (brighten) the object.
Setup the Date
Select "Date / Time" and press the OK button to set the internal clock. Edit
the correct date (y/m/d) and time (h/m/s) by pressing the Up-down button.
Press the OK button again to complete the setting.
P.10
5. How to use the binocular
Focusing the Binocular
Adjusting the eyepieces
The distance between your eyes is called interpupillary distance.
The interpupillary distance is different from one person to another.
It is important to adjust your interpupillary distance before using the VistaPix:
- Hold VistaPix firmly in the normal viewing position.
- Adjust the barrels by pushing together or pulling apart until you see a single
circular image with both of your eyes.
To adjust the eye-relief for eyeglass wearers: Fold down the rubber eyecups
and place them against your glasses to get the best viewing result.
A. Set the Diopter Knob on underside of VistaPix to its center point between
- and + .
B. Choose an object that is at least 15 meters (49 ft) away.
C. Looking with just your left eye, rotate the Center Focus Knob(2) until the object
you are viewing is in best focus.
D. Looking with just your right eye, rotate the Diopter Knob(1) until the object you
are viewing is in best focus.
E. Viewing your object with both eyes, turn the Center Focus Knob to bring it in
best focus.
Resolution
Exposure value
Date/Time
TV out
Timestamp
Resolution
Date/Time
TV out
Timestamp
Exposure value
SETUP
SETUP
Resolution
Exposure value
Date/Time
TV out
Timestamp
Resolution
Exposure value
TV out
Timestamp
Date/Time
SETUP
SETUP
TV-out Display Mode
Select "TV out" and press OK button. Choose the corresponding output
(NTSC for United States or PAL for Europe) and press OK button to
complete setting.
NTSC
PAL
NTSC
PAL
TV OUT
TV OUT
Resolution
Exposure value
Date/Time
TV out
Timestamp
Resolution
Exposure value
Date/Time
Timestamp
TV out
SETUP
SETUP