Filter
Top Products
7
2
7300 Universal Camera Mount
The 7300 camera mount can be used with most brands of solid-
state board cameras. The mount fits all board cameras with these
dimensions.
Model 7311 Black & White Camera
512x492 pixels, .2 lux, 3.6 mm lens
Includes power supply (12 VDC @ 250 mA)
ChannelPlus 7300 Series Solid State Cameras
The 7300 series are versatile solid state cameras, designed
to fit standard single gang J boxes. The power supply terminals
and BNC video connector are mounted on a PC board for
maximum ruggedness and dependability. The camera
mount is weather resistant and comes with a standard
single gang gasket. The solid brass cover plate may
be painted to match a house color.
42mm Max.
2mm Min.
Maximum depth depend on “J” Box.
12mm Max.
14mm
Model 7300 Universal Camera Mount
will accept cameras of these dimensions.
(it will not work with pinhole lens).
Model 7320 Color Camera
512x492 pixels, 4 lux, 3.6 mm lens
Includes power supply (12 VDC @ 250 mA)
Specifications:
Typical @ 25°C ± 5°C
Painting the Cover Plate
The solid brass cover plate may be painted to match the house color.
First, remove the camera from the plate. Lightly sand the plate using
300-400 grit wet/dry paper. Use a good quality metal primer that is rated for
exterior use. Before applying the primer, follow the manufactures instructions
for cleaning the plate. Standard house paints may now be used.
Model
Image sensor
Image
Resolution
Lens
Signal to Noise ratio
Power supply part #
Minimum illumination
Power
AGC
Power consumption
7311 7320
1/3“ interline transfer CCD
1/4“ interline transfer CCD
EIA (Black & White )
380 TV lines
3.6mm F2.0
3.6mm F2.0
50 dB
350-083
350-083
.2 lux
8-14 VDC
8-14 VDC
Yes
1 W
NTSC (Color)
330 TV lines
46 dB
4 lux
Yes
1.5 W