Filter
Top Products
6
Trouble Shooting
Problem
Possible Cause Solution
No motion and no
video output
Normal Video output
but abnormal motion
Have motion control,
but no video
Normal video output,
but no motion control
Power supply is
disconnected or
damaged.
Power supply voltage
is too low.
Camera protocol
does not match
controller.
Faulty coax
connection.
Check power
supply. Replace
if needed.
Make sure to
use the correct
power supply.
Move the power
supply closer to
the camera.
Check the DIP
Switches.
Check with
cable tester or
verify cable by
sending known
good video
signal through
it.