Chauvet LED PAR 64-36C Camera Accessories User Manual


 
4. Operating Instructions 13 10/27/2009 1:10 PM
Standalone Operation
Automatic
This fixture has a preprogrammed color fade program. This is accessed via the DIP switches on the
back of the fixture, and the speed may be increased, as well. Please see the chart below for further
explanation.
Mode DIP switches
Master Auto 7, 9, 10 = On
Increase Speed 1~6 = On (add more DIP switches to reach higher speed)
Sound-Active
This fixture has preprogrammed sound triggered chases. These are accessed via the DIP switches
on the back of the fixture, and the sensitivity may be adjusted using the audio adjustment knob.
Please see the chart below for further explanation.
Mode DIP switches
Master Sound 10 = On
Static Colors
This unit has separate DIP switches for each of the 3 colors (red, green, and blue). These are
accessed via the DIP switches on the back of the fixture. Each of the 3 color may be mixed with
different intensities. Please see the chart below for further explanation.
Mode DIP switches
Master Static 8, 9, 10 = On
Static (Red) 1~2 = On
Static (Green) 3~4 = On
Static (Blue) 5~6 = On
Fixture Linking
In order to use this fixture in a DMX or master/slave operation, you must daisy chain, using DMX
cables to link from one fixture to another.
Additional signal
link out