Filter
Top Products
5. If necessary, change the settings to get the best images depending on your application
by using the button on the bottom of the camera.
- Get rid of the cap⑥ for the OSD button by turning counter-clockwise and then
change the settings (refer to the included instruction manual for OSD Control).
- Turn the cap⑥ clockwise to secure after changing the settings.
6. Connect the one end of 100’ cable (supplied) to the BNC (F) of 5’ cable attached to
the camera and the other end (BNC) of cable to the video devices such as DVR,
monitor/TV. Plug the provided AC power supply to the DC jack (red) on the end of
100’ cable.