Filter
Top Products
4. If necessary, change the settings to get the best images depending on your application
by using the buttons in the camera (refer to the instruction manual for OSD control).
5. Assemble the transparent dome③ by turning the locking ring② clockwise. The
locking ring② should be securely fastened so that water can not leak into the camera.
6. Connect the one end of BNC cable (not supplied) to the BNC (F) of 5’ cable attached
to the camera and the other end (BNC) of cable to the video devices such as DVR,
monitor/TV. Plug an AC power supply (not supplied) to the DC jack (red) on the
camera.