Filter
Top Products
12
2Select [Action] [Scan for hardware changes]
If your O/S (operation system) is Win 98 Se or Win Me
3Press right key/[Refresh]
Apretar right key/[Refresh]
2. Q: The camera can’t work after connection, there’s a yellow mark “!”
Showing at Device Manager/Imaging devices/
VGA Dual Camera.
A: Due to the collision of the computer’s peripheral please follow below
steps:
(1) Select
VGA Dual Camera. in [Device Manager]
(2) Press right key/[Uninstall] (If OS is Win 98 Se or Win Me, Press right
key/[Remove])
(3) Un-plug USB cable
(4) Restart Computer
(5) Re-plug USB cable
3. Q: After finish software installation and connected the camera to the
computer, in device manager there’s “unknown USB device”.
A: Please check your camera was connecting well with your computer, if it is
connecting well please do the following steps:
(1) Unload
“VGA Dual Camera.” Driver
(2) Re-install My DSC driver.