Filter
Top Products
28
CHOOSING THE PICTURES FOR PRINTING
You can select images for printing and specify the number of print copies. This is extremely convenient for
sending the images to a photo developing service or for printing on a direct print function compatible printer.
1. Insert an SD card and transfer the files from internal memory to SD card.
2. Press
to enter review mode.
3. Press the MENU button.
4. Press the or to select Print.
5. Press the OK button to enter its sub-menu.
6. Press the or button to select On.
7. Press the or button button to select Order, then press OK. The
top side of the LCD shows as below:
8. Press the or button to set the number of copies (from 0 to 99).
9. Press the or button to search for the other pictures to be printed. Then press the or button
to set the number of copies. The total number of copies will be shown on the LCD.
Note: Video clips cannot be printed. The message “Function not supported” will appear if the file that you
are trying to set print order is video clip.
When the setting is complete, turn the camera off and take the SD card out for printing. Or connect the
camera with a direct-print compatible printer for printing.
RESETTING THE PRINT ORDER
The print settings can all be removed.
1. Insert an SD card and transfer the files from internal memory to SD card.
2. Press
to enter review mode.
3. Press the MENU button.
4. Press the or to select Print.
5 Press the or button button to select Reset then press OK to
enter its submenu.
6. Press OK again to confirm. The print setting will be removed.
SETTING FILE NAMES & PRINTING ORDER
Number of
copies of the
current picture
Total number
of copies
6340z UG-ENU (516084-00).indd 286340z UG-ENU (516084-00).indd 28 10/20/04 5:33:04 PM10/20/04 5:33:04 PM