11
GETTING STARTED (CONTINUED)
Important notes about the batteries:
1. Please do not remove batteries while the camera is still on. The camera
may still be processing your picture at this time. Removing the
batteries at this time will result at losing your picture and affect the
normal operation of the camera. Make sure the camera is power off
before removing the batteries.
2. Excessive use of flash will limit your battery life.
3. When the battery indicator start blinking, the batteries level becomes low
and please avoid taking any more pictures.
Important notes about the memory:
Eye Q 1300 comes with 2MB of internal SDRAM memory. SDRAM
memory is volatile and the memory will be lost if the batteries are too low, or
if the batteries are removed. If the battery sign start blinking, please stop
taking more pictures and upload your pictures to your PC as soon as
possible.
Important notes about uploading your pictures to your PC:
1. Always turn on your camera before connecting to the USB cable and
your PC.
2. Always upload your pictures to your PC before the battery runs low.
3. Never open the battery door before uploading your pictures to your PC.
Power off your camera:
When the camera is processing your pictures, pressing the power button
will not shut down the camera immediately. Press the power button and
the camera will shut down automatically when the camera finish processing.
Instr. Manual M1 (English) 26/10/01 11:38 am Page 11
