18
OPERATION (CONTINUED)
When the power is on, press
the MODE button ❶ three times
to enter the TV Format Feature
Setting menu;
“PAL” or “NTSC”
will appear in the display.
1
1
Press the SELECT/Flash button ❶ to
cycle between the modes to select
the desired mode. When the desired
mode (“PAL” or “NTSC”) appears in
the display, press the Shutter button
❷ to confirm the setting.
2
1
2
To use the camera with your TV:
Connect the supplied video cable to the VIDEO OUT jack on your camera and
the other end to your TV. Make sure the TV’s video option is set to this jack
and turn the camera on. Your images will appear on the screen. Press the
SELECT (Next Image) ❶ or MODE (Previous) button ❷ to cycle through the
pictures. Press and hold the SELECT (Slide Show) button ❶ for at least one
second to activate the slide show. Press any button to stop the slide show.
1
2
3
TV FORMAT
Select NTSC or PAL video format to correspond with your TV. To
set the TV format, follow the instructions below:
WARNING: The TV out function draws a larger amount of current from the
batteries during its operation. Please be aware that usage of this feature
may cause your batteries to drain faster than at normal operation. It is
recommended that you be prepared in andvance and have spare batteries
available when planning to perform a slide show of your images on a TV set.
Instr. Manual M1 (English) 26/10/01 11:38 am Page 18
