Eye-Q 2133z User’s Manual
Safety Information
Do not look at the sun through the viewfinder. Viewing the sun or other
strong light source through the viewfinder could cause permanent visual
impairment.
Do not disassemble the camera. Touching the product’s internal parts
could result in injury. In the event of a malfunction, only a qualified
technician should repair the product. Should the product break open as a
result of a fall or other accident, take the product to an authorized service
center for inspection.
Avoid contact with liquid crystal. Should the LCD display break, care should
be taken to avoid injury due to broken glass and to prevent the liquid
crystal from touching the skin or entering the eyes or mouth.
Do not use in the presence of flammable gas. Using electronic equipment
near flammable gas could result in explosion or fire.
Observe caution when operating the flash. Do not use the flash close to
anyone’s eyes. This can cause temporary damage to eyesight. Particular
care should be observed when photographing infants – keep the flash at a
distance of at least 1 meter from infants’ eyes.
bserve proper precautions when handling batteries. Use only size AA
alkaline batteries. Batteries may leak or explode if handled improperly.
Remove batteries (and memory card) from the camera if you are going to
store the camera for extended periods of time. Ensure the camera is turned
2
off before inserting or removing batteries. Do not insert batteries backwards
or upside down. Do not disassemble batteries. Do not expose batteries to
flame or excessive heat. Do not immerse batteries in or expose to water.
Discontinue use immediately if you notice any changes in the battery such
as discoloration, deformation or leakage.