Filter
Top Products
Q & A
E-25
Power not turned on
• Ensure the correct connection between the battery. Check the connection.
• Check whether the batteries are full. Use full batteries instead.
The camera can not turn on
• Check whether the batteries are full. Use the new batteries instead.
• Carrying the camera suddenly from a cold location into a warm place will cause
condensatin to form on the inside of the camera.Wait until the water droplets
disappear.
Images can not be shot
• Ensure the correct setting of the mode switch. Check the mode setting.
• Not enough memory on the memory card. Delete some recorded images before
use.
Images can not be displayed on the LCD
• Check whether the LCD is set to “OFF”, and press the MENU/DISP button longly
to turn on it.
Images can not be played back
• Check the existence of the memory card in the camera.
• No images on the memory card.
• Mode switch not yet turned to “PLAY”.
Images can not be played back on a TV set
• Ensure the correct connection between the camera and the TV set.
• Check whether the two broadcast signal settings match.
• Set your TV set to video input mode.
Images can not be transferred to a PC
• Ensure the correct connection between the camera and the PC.
• Check whether your PC recognizes the camera.
•
If your PC's OS is windows 98, check whether the mass storage driver
has been installed in your PC, otherwise install the driver.