Filter
Top Products
8
In power-on state, when battery level is very low, the red icon on the bottom left of
the screen will flash and the camera will turn off after one second. You must replace
the batteries.
2.4 Change mode
After powering on, the camera will always enter video record mode, press mode key to
change mode between video record and capture.
In video record or capture mode, press left key or right to enter playback mode.
Press Mode key to exit playback mode and return preview mode
2.5 Change resolution
You can select High or Low resolution for recording videos or taking still pictures.
Slide the Resolution Switch located on camcorder’s side and select desired position.
LCD screen will display “Hi” or “Lo” indicating selected resolution.
2.6 Record Video
In video record mode, press shutter key ( ) to begin video recording, press the
shutter key again to stop recording.
Press up key or down key to zoom in or zoom out the image.
In playback mode, press Shutter key to start or stop video.