Filter
Top Products
1-8 Dell PowerEdge Cluster Platform Guide
Peripherals for PowerEdge 2450 Cluster Nodes
The following list provides PCI slot assignment information for the system’s PCI
buses and HBAs.
• PCI buses
— PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz.
• HBAs
— You can install HBAs in any available PCI slot.
Peripherals for PowerEdge 2550 Cluster Nodes
The following list provides PCI slot assignment information for the system’s PCI
buses.
• PCI buses
— PCI bus 0: PCI slots 1 through 3 are 64-bit, 33-MHz.
• HBAs
— You can install HBAs in any available PCI slot.
Peripherals for PowerEdge 4300/4350 Cluster Nodes
The following list provides PCI slot assignment information for the system’s PCI
buses, HBAs, and the DRAC 2.
• PCI buses
— PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz slots.
• HBAs
— For dual HBA configurations, Dell recommends installing the HBAs on sepa-
rate PCI buses to balance the load on the system.
• DRAC 2
— If you are currently using a DRAC 2 or plan to use one in the future, install it
in PCI slot 4.
Peripherals for PowerEdge 4400 Cluster Nodes
The following list provides PCI slot assignment information for the systems’s PCI
buses, HBAs, and the DRAC 2.
• PCI buses
— PCI bus 0: PCI slots 1 and 2 are 64-bit, 33/66-MHz.
— PCI bus 1: PCI slots 3 through 6 are 64-bit, 33-MHz.
— PCI bus 2: PCI slot 7 is 32-bit, 33-MHz.