Filter
Top Products
1-4 Dell PowerEdge Cluster Platform Guide
NOTE: All QLogic HBAs used in the cluster nodes must be the same model within the
cluster.
The supported drivers for the QLogic HBAs in Windows NT configurations are as
follows:
• For QLA-2100/ 33-MHz, version 7.05.08 or later
• For QLA-2200/ 33-MHz, version 7.05.08 or later
• For QLA-2200/ 66-MHz, version 7.05.08 or later
You can download the latest drivers from the Dell Web site at
http://support.dell.com.
Windows NT 4.0 Service Pack Support
Windows NT Service Pack 6a or later is recommended for PowerEdge Cluster
FE100/FL100 and FE200/FL200 systems.
Table 1-1. QLogic HBAs Supported for FE100 and FL100 on Windows NT
PowerEdge
Servers 1550 2400
2450 2550
4300/
4350 4400 6100
6300/
6350
6400/
6450 8450
QLogic
HBA
s
QLA-2100/
33-MHz
xxx
QLogic
HBA
s
QLA-2200/
33-MHz
xx x x x xx
QLogic
HBA
s
QLA-2200/
66-MHz
xxx x x x x xx
Table 1-2. QLogic HBAs Supported for FE200 and FL200 on Windows NT
PowerEdge
Servers 1550 2400
2450 2550
4300/
4350 4400
6300/
6350
6400/
6450 8450
QLogic
HBA
s
QLA-2200/
33-MHz
xx xxx x x
QLogic
HBA
s
QLA-2200/
66-MHz
xxxx xxx x x