Delta CP750 Photo Printer User Manual


 
40
Getting Ready Printing AppendicesOverview
Troubleshooting Tasks and Index
NextBack
Return to Cover Page
CAUTIONS
WARNINGS
Do not stick any part of your hand into the printer interior.
Do not use or store the equipment in the following types of places.
Humid or dusty areas, places subject to heavy vibrations, places near flames, places
subject to strong sunlight, or hot places such as an automobile trunk or dash-
board.
Do not attach metallic pins or allow dirt to collect on the power plug or
recharging connectors.
Do not use the compact power adapter for any other equipment except
this printer, use it beyond its rated capacity or voltage, or leave the plug
partially inserted into a power outlet.
Remove the compact power adapter power cord from the power outlet
when not using the printer.
Leaving it plugged in for long periods of time may pose the risk of heat generation
or deformation.
Do not touch the paper or remove the paper cassette while printing is in
progress.
To Prevent Malfunctions and Damage Caused by Electromagnetic Fields
Never position the equipment close to motors to other devices that
generate strong electromagnetic fields. Moreover, do not use it near
televisions or AM radios.
To Prevent Condensation
You can avoid condensation by placing the equipment in an airtight,
resealable plastic bag and letting them adjust to temperature changes
slowly before removing them from the bag. In the event that condensation
does form within the equipment, keep it at room temperature until the
water droplets evaporate naturally before using it.
Battery (SELPHY CP750 Only)
Do not place the battery pack near a heat source or expose it to direct
flame or heat.
The battery pack should not be immersed in water.
Do not attempt to disassemble, alter or apply heat to the battery pack.
Avoid dropping or subjecting the battery pack to severe impacts that could
damage the casing.
Use only recommended battery pack and accessories.
There is a risk of the battery exploding or leaking. In the event that a battery leaks
and the eyes, mouth, skin or clothing contact these leaked substances, immedi-
ately flush with water.
When you are not using the printer, remove the battery and store it
properly.
Do not place anything, such as tablecloths, carpets, bedding or cushions, on
top of the battery charger while it is charging.
There is a risk of heat generation or deformation if it is left connected for a long
period of time.
Before you discard a battery, cover the terminals with tape or other
insulators to prevent direct contact with other objects.
Contact with the metallic components of other materials in waste containers may
lead to fire or explosions.