Filter
Top Products
DNS1010_Quick Installation Guide_En_R1
www.digimerge.com
Page 3
Mounting Instructions: Run the cables
to the desired location. Securely
mount the device to a wall or other
surface using 4 metal screws (not
provided).
HARDWARE CONNECTIONS
1
Connect the network cable to
the Video Server’s RJ45 network
connector.
A
B
Connect a BNC camera (not included)
to the Video Server’s BNC Input port
(left port). Optionally, an audio input
device (i.e. Microphone) can be con-
nected to the Audio In port. The Video
Out port can be used to connect a
local monitor (no audio).
C
Connect the mini-DIN Terminal Block
cable to the Video Server’s DIN
connector. For more details on the
available Terminal Block connections,
please check the hardware user
manual.
D
Connect the supplied power adapter
to the power connector on the Video
Server.
E
WALL MOUNT TABLE MOUNT
OPTIONAL