Filter
Top Products
56
• See Functions Available in Each Shooting Mode (p. 160).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 56).
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the SET/FUNC. button while the image is displayed on the LCD
monitor. (It will not operate in the mode.)
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed. (It will not
operate in the mode.)
- Display the image’s review information (p. 37).
- Erase the image (p. 104).
- After pressing the SET/FUNC. button, magnify the image (p. 92).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or
changed to any time in the range of 2 to 10 seconds in one-second increments.
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 45).
Shooting Mode