Filter
Top Products
85
Shooting
• You are recommended to set the shooting mode to and the
exposure compensation setting to zero (±0) before setting a custom
white balance. The correct white balance may not be obtained when
the exposure setting is incorrect (image appears completely black
or white).
• Shoot with the same settings as when reading the white balance
data. If the settings differ, the optimal white balance may not be set.
In particular, the following should not be changed.
- ISO Speed
-Flash
Setting the flash to on or off is recommended. If the flash fires
when reading the white balance data with the flash set to (Auto
with Red-Eye Reduction) or (Auto), make sure that you also
use the flash when you shoot.
• Since the white balance data cannot be read in Stitch Assist mode,
preset the white balance before selecting in the
(Rec.)
menu.
• The camera will retain the manual white balance setting that you
record even if you reset the camera to the default settings (p. 54).
3
Aim the camera at the white paper,
cloth or gray card and press the
MENU button.
• Compose the image so the paper or cloth
completely fills the center frame in the
display before pressing the MENU button.
The white data records when you press
the MENU button.The camera reads the
white balance data when you press the
MENU button.
• You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
4
Press the SET/FUNC. button.
The display will return to the shooting
screen.