Filter
Top Products
followings.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is sent.
Note
：
• When you set to On, be sure to select either or both SMTP or/and POP before SMTP.
POP server name：It is necessary when the POP before SMTP is selected in Authentication. Type the POP
(receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is
necessary when the SMTP server which sends e-mails performs authentication using the POP user
account.
User name, Password：Type the user name and Password of the user who has the mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
Recipient e-mail address：Type the recipient e-Mail address up to 64 characters. You can specify up to
three recipient E-mail addresses.
Administrator e-mail address：Type the Administrator e-Mail address up to 64 characters. This address is
used for reply mail and sending system messages from the SMTP server.
Attached File Type: Select to attach the file as JPEG or MPEG4.
Subject：Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent
according to the alarm detection when Alarm sending of the alarm tab is set to On, the characters standing
for the sensor type added to the subject.
Message：Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.)