Filter
Top Products
41D-Link DCS-3415 User Manual
Section 4 - Configuration
Secondary HTTP
Port:
Access name for
stream1:
Access name for
stream2:
FTP Port:
RTSP Streaming:
Authentication:
Access name for
stream1:
Access name for
stream2:
The default value is 8080.
After you have enabled the Authentication, you will need to configure and use the access name to access your video file.
For example, http://camera ip/video.mjpg (video.mjpg is the Access name, you can modify it here)
The default name is video.mjpg.
The default name is video2.mjpg.
Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming
source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG, users
will receive continuous JPEG pictures. This technology, known as "server push", allows the Network Camera to feed live
pictures to Mozilla Firefox and Netscape.
Use
http://<ip address>:<http port>/<access name for stream1 or stream2>
to make connection.
For example, when the access name for stream 1 is set to video.mjpg:
1 : Launch Mozilla Firefox or Netscape.
2 : Type the URL command in the address field. Press Enter.
3 : The JPEG images will be displayed in your web browser.
Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP server.
For example FTP://68.5.1.81:60 (if you use port 60 for your FTP server)
This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA.
Choose either Basic where the password is not encrypted, or Digest where the password is encrypted during the transmission
to the web server. After you have enabled the Authentication, you will need to configure and use the access name to access
your video file. RTSP://camera ip/live.sdp (live.sdp is the default access name, you can modify it here)
The default name is live.sdp.
The default name is live2.sdp.