Filter
Top Products
10D-Link DCS-5010L User Manual
Section 2 - Installation
Zero Conguration Setup
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration Setup. Zero Conguration
automatically congures your camera's settings for you and adds the camera to your mydlink account automatically without
the need to run the Setup Wizard.
Step 1 - Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available (LAN) port on your D-Link Cloud Router. Connect the
power adapter into the power port on the back of the camera.
Note: If you wish to use your camera wirelessly, you will be able to remove the
cable after the Zero Conguration Setup is complete and place the camera within
your wireless network. The router will congure the camera’s wireless settings
automatically.
Step 2 - Attach the External Power Adapter
Plug the power adapter into a wall outlet or surge protector.