D-Link DCS5020L Security Camera User Manual


 
19D-Link DCS-5020L User Manual 19
Section 3 - Conguration
Conguration
Using the Web Conguration Interface
After completing the Camera Setup Wizard, your camera is ready to use. The camera’s built-in web conguration interface is
designed to allow you to easily access and congure your DCS-5020L. There are two ways in which you can access your camera’s
web conguration interface:
1. Log in to your mydlink account to access your camera’s conguration interface.
2. You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
Explorer. To log in, use the User name admin and the password you created in the Setup Wizard. If you did not create a
password, leave the password eld blank. After entering your password, click OK.
Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP is
192.168.0.20. If the camera is connected to a router or network, a dierent IP address may have been assigned.
DCS-5020L