Filter
Top Products
49
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Highlight the camera you wish to add and click on Add. The camera will automatically be
added into the IPView SE list view. If you add the same camera more than once you will
receive the following message (see below).
If the Login Camera dialog box appears, make sure to enter the correct User Name and
Password. Click OK. The camera will be added into IPView SE. If the User Name and
Password are entered incorrectly, the camera will not be added into IPView SE.
The Login Camera dialog box will appear only if your have already set the Username
and Password during the Web Configuration setting.
How to Delete a Camera
Click the Liberate Camera button on the IPView SE, while you are connected to the
camera you would like deleted. The IPView SE camera button become available as soon as
you click on the Liberate Camera button. The green light from under the camera button will
become grey.
A grey light under the camera button
means that this channel is available to
add a camera.
Before the camera is liberated you will
be given the choice to confirm your
request to remove the camera.