Filter
Top Products
3. Use the joystick to highlight the QUALITY option.
ty.
.1.6 White balance
option to correct color for different
ote: The white balance option can only be changed when
o set the white balance:
. Turn the camera on and ensure that it is in Photo mode.
ight the WB option.
, tungsten,
.1.7 Focus selection
tion to determine where the camera
to or
39
4. Use the joystick to select high, medium, or low quali
5. Press the menu button again to leave the menu.
4
Use the white balance
lighting conditions. When white balance is set to auto, the
camera will automatically compensate for different lighting
conditions. You can also set white balance to sunlight, cloudy,
tungsten, or fluorescent light.
N
the camera mode is set to Manual. See “Auto or Manual
Mode” on page 35.
T
1
2. Press the menu button.
3. Use the joystick to highl
4. Use the joystick to select Auto, sunlight, cloudy
or fluorescent light (tungsten is incandescent light).
5. Press the menu button again to leave the menu.
4
Use the focus selection op
focuses. The focus selection can be set to center, left, right, top
or bottom.
Note: The focus selection option can only be changed
when the camera mode is set to Manual. See “Au
Manual Mode” on page 35.
Picture menu