Filter
Top Products
48
is happened between time interval; if the time interval is too
short, you may receive too much unnecessary images, and
consumes too much disk
Pre Recording
Time
This option allows the IP cam to capture additional image
frames prior to the event. The duration of pre-recording is
based on the settings of Resolution, Video Type, and Frame
Rate and estimated by the IP cam automatically. For
example, if the Resolution is 640x480@MPEG4 and Frame
Rate is 15fps, the pre-recording time is about 2 sec.
Post Recording
Time
Select the duration you wish this camera to record image
when a motion is detected from dropdown menu. The
available option of the duration is based on the settings of
Resolution, Video Type, and Frame Rate. For example, if
the Resolution is 640x480@MPEG4 and Frame Rate is
15fps, the available options of are 1, 2, and 3 (second).
Send Recording
File to Email
Select „Yes‟ to send a picture to the Email address you
specified in „E-Mail & FTP‟ menu when a motion is
detection, and select „No‟ to disable this function.
E-Mail Subject
Set the subject of Email being sent here. This will help you
to distinguish the Email sent by this IP camera from others.
Send snapshot
file to FTP
Select „Yes‟ to send a picture to the FTP server you
specified in „E-Mail & FTP‟ menu when a motion is
detection, and select „No‟ to disable this function.
Click „Apply‟ to save settings and make the new settings take effect.