Filter
Top Products
2
Printing on Posterboard
When you print on posterboard or other thick media
(more than 19 mil thick), you should open the front
cover before loading as described below.
1
Make sure the printer is on and the roll paper cover
is closed.
2
Press the Paper Source button until the icon
appears on the LCD.
3
Release the paper lever.
Loading and Using Cut Sheet Paper
Loading and Using Cut Sheet Paper
1
Remove any roll paper from the paper path. Make
sure the printer is on and the roll paper cover is
closed.
2
Press the Paper Source button until the icon
appears on the LCD.
3
Release the paper lever.
Note: If you’re printing on small sheets or fine art
paper, do not release the paper lever.
4
Feed the sheet into the paper slot. Make sure the
right edge of the paper is straight and aligned with
the marks on the roll paper cover.
5
If you released the paper lever, return it to the
locked position.
6
Press the Pause button. The sheet feeds into
the printing position automatically and READY
appears on the control panel.
Caution: To avoid damaging the printer, never
move the paper lever during printing, or while the
Power or Pause light is flashing.
7
Print your page. After it is finished, the sheet stays
in the printer.
8
To remove your print, press the button.
SP7898_QRGin_CPD20272.indd 2 8/5/05 10:15:29 AM