Filter
Top Products
professional control surfaces
Artist Series
Artist Series
EuCon APPLICATION SETUP GUIDE
MACKIE CONTROL
20
5.3 Digital Performer
Before proceeding, you must already have completed the steps described in
Setting Up EuCon for Mackie Control on page 15.
To finish the configuration:
1. Open Applications->Utilities->Audio MIDI Setup and select the MIDI Devices
tab (Figure 5-6).
Figure 5-6 Audio MIDI Setup
2. Click Add Device, double-click the device that appears in the Audio MIDI Set-
up dialog, and assign a device name (i.e., MCU1).
There is no need to modify the manufacturer, model or any other fields.
3. Repeat the previous steps for each additional Artist Series control surface
in your network.
4. In Digital Performer select Setup->Control Surface Setup.
5. Configure the dialog settings as they appear in Figure 5-7.