EverFocus ED700 Security Camera User Manual


 
1
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with
the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and
the camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do
not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures
within -10ºC ~ +50 ºC (14 ~122 ) and humidity between 20% and 80%. This device is
not rated as submersible. The input power source is 12VDC.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera
plus any wind, snow, ice or other loading, and securely attach the camera to the mounting
surface using screws and anchors which will properly support the camera. If necessary (e.g.
when mounting to drop ceilings) use a safety wire to provide additional support for the
camera.
Table of Contents
Product Overview………………………………………………………………..1
Main Features……………………………..……………..…….…………………2
Content List……………………………………………………………………… 2
Specifications………………………………………………………….………… 3
Dimensions………………………………………………………………………. 4
Installation……………………………………………………….……………… .4
Product Overview
Get exceptional low light sensitivity and the ultra high resolution listed in the specs from the
actual camera you install. The EverFocus Ultra Series EQ700 uses the Sony Exview HAD II
960H CCD to produce in excess of 720 horizontal TV lines of resolution from each and every
Ultra Series 720+ camera we deliver; the resolution delivered by this advanced imaging
technology will amaze you. Combine this with digital day/night, a native low light sensitivity of
0.05 lux, back light compensation (BLC) and highlight compensation (HLC) in a 3-axis wall or
ceiling mount indoor plastic housing and you have a cost effective camera that fits a wide variety