Filter
Top Products
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
54 of 115
5.5.2.5 Event action: Signal digital output
This event action allows to switch a contact output of an installed IP-device.
After selecting SIGNAL DIGITAL OUTPUT as event action and double click opens a
window with all available digital output contacts in the system:
Activated the checkbox at desired contact output and confirm with OK.
5.5.2.6 Event action: Send a SMS message
After selecting SEND A SMS MESSAGE as event action and double click opens a
window with a list of available contact persons (setup in > CONFIG > SETTING >
ADDRESS BOOK required):
Select a contact for SMS notification and confirm with OK.